...

The membership section is further divided into members, member groups & categories, certifications and transfers.

...

1. The first tab is the Activity tab where you will be able to see any activity against a members' profile (e.g when a member profile was updated this should be shown here. It should also show who made that update).
2. 

Details

1. The second tab is the Details tab where you will find most member information. You will also be able to perform the following actions:
2. 
   
   1. Manage details - edit any of the key details for this member
      1. 
   2. Assign/Edit Category - add or remove a category for this member
      1. 
   3. Edit Membership - edit any of the members' membership information
      1. 
   4. Add to Group - you can add a member to a specific group and you will also be able to remove a member from a club member group
      1. 
   5. Add Certification - you will be able to add a certification to the member
      1. 
   6. Add to Group - you will be able to add the member to an Email Campaign Channel and also remove that member for the assigned channel.
      1. 

Member Groups

...

When you are in the member groups & categories section you will be provided with a list of all the member groups you have already created for your club group.

...

For each club group member group listed here you will be able to perform additional actions.

Member Groups

In the member groups tab of your list you will be able to see all member groups that have already been created. You will also be given an overview of some of the groups' details. Furthermore, you will be able to perform the following actions:

1. Add Member Group - You will be able to add new member groups.
   1. 
2. Edit Group/Delete Group - You will be able to edit or delete existing member groups (Attention: Groups can only be deleted when no members are associated to this category).
   1. 

...

When you are in the certifications section you will be provided with a list of all the members currently holding a certification in your club group.

The list is divided into two sections (tabs) - members and manage.

...

For each member listed here you will be able to retrieve their certification status, the validity of their certification and the certification type. You will be able to perform the following actions:Image RemovedImage Added

1. You will be able to search for a particular certification by name.
2. You will be able to apply specific filters to only find certifications matching your search criteria.
   1. Valid UntilExpires Before
   2. Certification Title
   3. Assignee Name
   4. Approver Name
   5. Status
   6. Image RemovedImage Added
3. You will be able to change the amount of rows displayed in your certifications table.

...

In the manage section of certifications you will be able to approve, reject, extend revoke and revoke delete certifications you have permission to manage. If there are any certifications that require review by you they will be listed here.

Image Added

Transfers

In the transfers section you will be provided with a list of members that are transferring to a new club.

The list of members is divided into 3 sections (tabs) - pending, approved and reject.

If any members listed here require your input these will be shown accordingly.

Image RemovedImage Added

Clubs

In the clubs section of BowlsLink you will be able to find all information related to your club and any other clubs currently in BowlsLink and you have the permission to see.The clubs section is further divided into clubs and manage my club.

Clubs

In the clubs sub-section you will be able to see all clubs that are currently active in BowlsLink. You will be given some club details without clicking into their club profile and you will be able to perform the following actions:Image Removed

Image Added

1. You will be able to click onto the clubs' name to retrieve additional information about the chosen club.
2. You will be able to sort the list of clubs differently by clicking on the different column headers.
3. You will be able to search for a particular club by name.
4. You will be able to apply specific filters to only find clubs matching your search criteria.
   1. Groups
   2. States
   3. Image RemovedImage Added
5. You will be able to change the amount of rows displayed in your club clubs table.

...

Groups

In the manage my club groups sub-section you will be able to see all the details relevant to your clubclub groups you have permission to see. You will be able to edit all the club information for your club.

The manage your club sub-section is divided into three tabs - Details, Additional Details and Club Member Metadata.

Details

In the details tab of your club see the main group and any further sub-groups. It will also show you how many clubs are part of a particular club group and you will be able to edit the following field groups:

1. Club Overview
2. Contact Details
3. Club Address
4. Financial
5. Image Removed

Additional Details

In the additional details tab you will be able to update any additional details that the club is requesting. If no additional details are required this tab will not display anything.

Image Removed

Club Member Metadata

In the club member metadata tab you will be able to create new additional fields to gather more data for your club members. You will be able to add the following fields:

1. HTML
2. Title
3. Divider
4. Text
5. Yes/No
6. Long Text
7. Date
8. Dropdown
9. Image Removed

retrieve the names of the clubs that are part of a particular club group.

Image Added

Campaigns

When you are in the campaigns section you will be provided with a list of all campaigns currently available.

...

When you create a new campaign you will need to go through a few steps to get the campaign to a state where it can be broadcasted to your desired audience.

Select "Create Campaign" from the top right-hand corner. 

...

1. Details - You will be asked to provided the following information:
   1. Campaign Name
   2. Subject
   3. Sender Name
   4. Sender Email
   5. Image Removed
   Content
   1. Reply-to Email
   2. Template
   3. Image Added
   4. After saving these details your campaign will be in draft status where you will be able to go through additional steps to finalise the campaign creation.
   5. Image Added
2. Content Editor - Here you will be able to provide and style all the content you would like to be included in your email campaign.
   1. Image RemovedImage Added
3. Delivery Schedule - In the delivery schedule section of your campaign you will be able to specify when your campaign should be sent.
   1. Image RemovedImage Added
4. Send Recipients - In this final step you will be able to specify who should receive your email. You can either select recipient groups you have created previously or you can nominate individual recipients.
   1. Image RemovedImage Added
5. Send TestPreview - During each of the four steps above you are able to send a test/preview for your email. You will need to provide an email address to send the test to. The system will then send the email at the current state.
   1. Image Removed
6. Preview - During each of the four steps above you are able to preview your email at its current state. This will help you identify if there are any more changes required to be made to your current email.
   1. Image Removed

...

1. 1. Image Added
2. Clone and Delete - Here you will be able to duplicate your current campaign to use for other broadcasts or you can also delete your current campaign if it is no longer required.

After completing any of the above steps you will always be able to see if all required information has been provided for this campaign. You will then be ready for broadcasting your campaign.

Sent

In the sent tab of the listed campaigns you will find all campaigns that have been broadcasted to members. You will be able to retrieve statistics on the performance of the campaign such as:

1. Campaign Name
2. Date Sent
3. Number of recipients 
4. Open rate
5. Bounce rate
6. More actions (e.g. Click through rate)

Drafts

...

In the drafts tab of the listed campaigns you will find all campaigns that are currently in draft status. These campaigns have not been broadcasted yet and can still get changed. You will be able to perform the following actions:Image Removed

...

same actions from the campaign creation section above.

Image Added

Additionally you will be able to:

1. search for a campaign by name.
2. You will be able to change the amount of rows displayed in your campaigns table.
3. You will be able to perform additional actions
   1. Edit - If your campaign still requires some work you will be able to continue to edit your campaign before sending it to your recipients. When editing a campaign you will be shown the same options as when you set up the campaign initially.
   2. Clone - If you need to duplicate a campaign you can do that here.
   3. Add Image - You can also add an image to your current draft.

Scheduled

...

In the scheduled tab of the listed campaigns you will find all campaigns that are currently scheduled for broadcasting. These campaigns have not been broadcasted yet and can still get changed. You will be able to perform the following actions:

Finance

In the finance section of BowlsLink you will be able to find all information related to finances of your club.

The finance section is further divided into Invoices and Fees.

Invoices

When you are in the invoices section you will be provided with a list of all the invoices related to your club.

You will also be given the functionality to create custom invoices.

The list is divided into three sections (tabs) - approved, draft and voided.

For each invoice listed here you will be able to retrieve further information by clicking on the desired invoice.

Creating a custom invoice

When creating a custom invoice for a particular member of your club you will need to follow the below steps.

...

. 

...

1. Image Removed

...

1. Add line item - You will be able to provide detail what you are invoicing the member for.
   1. Item
   2. Type
   3. GST
   4. Total
2. Select date - You can specify when the invoice was issued and when the invoice is due for payment
3. Delete - If your invoice is no longer required you can delete the current version of your invoice.
4. Download - If you need to save your invoice externally or print it you will be able to download the invoice for further actions.
5. Approve - Once you have included all required details in your invoice you can approve your invoice for actioning.
6. Image Removed

Approved

In the approved tab of the listed invoices you will find all invoices that are currently approved. These invoices are ready and you can perform the following actions:Image Removed

1. Enter payment - If you have received payment (full or partial) for your invoice you will be able to record it here.
2. Send - If your approved invoice still needs sending you will be able to do this through this function.
3. Download - Should you require to download your invoice you will be able to do this here.
4. Void - Should this invoice no longer be required it can get voided here.
5. View Payments - If you need to check in more detail when payments where made you can do this here.

Draft

In the draft tab of the listed invoices you will find all invoices that are currently in draft status. These invoices are not approved yet and you can perform the following actions:Image Removed

1. Edit
2. Delete
3. Approve
4. Download

Voided

In the voided tab of the listed invoices you will find all invoices that have been voided.

Image Removed

Fees

When you are in the fees section you will be provided with a list of all the different fee items related to your club.

You will also be given the functionality to add fees and fee packages.

The list is divided into three sections (tabs) - fee items, fee packages and fee labels.

Adding a Fee

When adding a new fee to your fee items you will need to follow the below steps:

1. Click on the "Add Fee" button at the top right-hand corner. Image Removed
2. Once done you will be prompted to add the following details to complete the fee setup:
   1. Name - Give the fee you are creating a name that is relevant and can get recognised by your members
   2. Description - Give more specific details what this fee is for to help your members understand what this fee relates to.
   3. Price and GST - Specify the price of the fee and whether it should include GST.
   4. Fee Type - You can select a fee type that already exists or you can "Add a new fee type" that can be reused for other fees moving forward. 
   5. Image Removed

Adding a Fee Package

When adding a new fee package you will need to follow the below steps:

1. Click on the "Add Fee Package" button at the top right-hand corner. Image Removed
2. Once done you will be prompted to add the following details to complete the fee package setup:
   1. Package Name - Give the fee package you are creating a name that is relevant and can get recognised by your members
   2. Description - Give more specific details what this fee package is for to help your members understand what it relates to.
   3. Billing Cycle - You need to set the billing cycle for this fee package so the system knows when to charge a member.
   4. Image Removed 

Fee Items

In the fee items tab of your fees list you will be able to see all the fee items currently available for assignment to a fee package.

You will be able to see all the details for a fee when it is listed here. You will also be able to perform the following actions:

1. Image Removed
   
   1. Edit Fee - If certain details for your current fee need to be updated you can do this here.
   2. Remove Fee - If a fee item is no longer relevant you can remove it here.

Fee Packages

In the fee packages tab of your fees list you can group your club fees into packages that can be assigned to your members.

You will be able to see all the details for a fee package when it is listed here. You will also be able to perform the following actions:

1. Image Removed
   1. Add Fee Item - Once you have created your fee package you will be able to assign all the required fees to it. You can do this here.
   2. Edit Package - If certain details for your current fee package need to be updated you can do this here.
   3. Remove Package - You can also remove a fee package should you no longer require it. Please be aware that fee packages can only be removed when they are not assigned to any of your members.

Fee Labels

In the fee labels tab of your fees list you can manage and edit the labels assigned to your club’s fee items.

You will be able to see all the details for a fee label when it is listed here. You will also be able to perform the following actions:

...

Image Added